Tune Audio

Creating machines to reproduce music is a sacred task and should be done in the most delicate manner. Altering the recorded art in any way, even if it is done to make it more pleasant for personal taste or more fancy, should not be accepted as high fidelity audio.

Most people spend their lives in noisy environments with less live music experiences. More and more settle for poor sources and or material. They are shifting their preference for more “circus like” reproducing techniques with blown up frequency extremes, sloppy bass, razor sharp highs,artificial imaging, unnatural dimensions, uninvolving mid. For people who reference reproduced to live music yes, it is possible.
Comparing system to system is a common mistake which gets people away from high fidelity and music enjoyment in the end.

www.tuneaudio.com

Anima 3-Way Horn Loaded Loudspeakers

ANIMA utilizes: 15″ woofer and 5″ mid modified in house, 1″ compression driver with neodymium magnet and titanium diaphragm for high frequencies.

ANIMA’s distinguished design is build around it’s bass horn which stands tall and fires to the floor. Mid height on the side you have a mid range horn and on top the high range horn. Both bass and mid horns are build from Baltic birch plywood while the hi horn is build from our proprietary epoxy compound. Crossovers are located on the bottom of the bass horn. This allows the crossover parts be well spaced to avoid any kind of interference and distant from any driver’s magnetic field. All components are hard wired and 1st order crossovers used in all ways.

All internal wiring are made of high purity OFC copper with waxed cotton insulation. Brass bracing parts with felt acoustic isolation are used to minimize vibrations transfer on contacts of the different horns. Horns are mechanically time aligned for time coherent result. For mid and high frequencies level adjustments are available to the user making it possible to fine tune ANIMA to the listening room. Beaming of the high frequencies horn is also available to aim the listening position.

Technical Specifications:

System Sensitivity: 97db
Impedance Nominal: 8ohms
Crossover @ 2500HZ

Recommended Power. > 5watt
Recommended Amplifiers. Low-mid powered tube or solid state with low or no feedback.

Recommended Placement. Near wall or room corner placement is desirable.
Preferred clearance between speakers >1.5 m.
Listening Distance. >2 m.

Dimensions.H149cm, W32cm, L56cm
Weight. 42Kgr each

Marvel 2-Way Horn Loaded Loudspeakers

High quality 8″ wide range driver for low & mid frequencies modified in house and 1″ compression driver with titanium diaphragm for high frequencies.

MARVEL, a two way design, compact enough to house a back loaded bass horn driven by a wide range 8″ driver. Bass horn fires to the floor and it’s build of grade A Baltic birch plywood. Mid frequencies are radiated directly by the cone while the high frequencies are handled by our proprietary epoxy compound tractrix horn.

Crossovers are of 1st order and located on the bottom of the bass horn well away from driver’s magnetic fields. All components are hard wired for best contact. All internal wiring are custom made of high purity OFC copper with waxed cotton insulation. Brass bracing parts with felt acoustic isolation are used to minimize vibrations transfer on contacts of the different horns.

High frequencies horn is located on the side of the bass horn mechanically time aligned for a time coherent result. User can adjust the level and beaming of the high frequencies horn to fine tune MARVEL to the listening room and position.

Technical Specifications:

System Sensitivity: 97db
Impedance Nominal: 8ohms
Crossover @ 2500HZ

Recommended Power. > 5watt
Recommended Amplifiers. Low-mid powered tube or solid state with low or no feedback.

Recommended Placement. Near wall or room corner placement is desirable.
Preferred clearance between speakers >1.5 m.
Listening Distance. >2 m.

Dimensions.H149cm, W32cm, L56cm
Weight. 42Kgr each

Prime 2-Way Horn Loaded Loudspeakers

High quality 6.5″ wide range driver for low & mid frequencies modified in house and horn loaded super tweeter with alnico magnet for high frequencies.

PRIME, a two way design, with the smallest footprint possible to house a bass horn. Bass horn fires to the floor and it’s build of grade A Baltic birch plywood. Mid frequencies are radiated directly by the cone while the high frequencies are handled by a horn loaded super tweeter.

Crossovers are located on the bottom of the bass horn well away of magnetic fields. This allows the crossover parts be well spaced to avoid any kind of interference and distant from any driver’s magnetic field. All components are hard wired for best contact. 1st order crossovers used in all ways.

All internal wiring are custom made of high purity OFC copper with waxed cotton insulation.
High frequencies horn loaded super tweeter is flash mounted on the baffle for a mechanically time aligned/time coherent result.

Technical Specifications:

System Sensitivity: 93dbImpedance Nominal: 8ohms
Crossover @ 6300HZ
Recommended Power. > 8watt
Recommended Amplifiers. Low-mid powered tube or solid state with low or no feedback.

Recommended Placement. Near wall or room corner placement is desirable.
Preferred clearance between speakers >1.5 m.
Listening Distance. >2 m.

Dimensions. H116cm, W28cm, L49cm

Weight. 33Kgr each

Pulse Active Horn subwoofer

PULSE utilizes: 15″ woofer and 100 watts embedded amplifier

PULSE active horn subwoofer is designed to reproduce the first octaves of the acoustic spectrum in large rooms without any limitation.

The horn, tuned to the lower acoustic limit, fires to the floor and loads a 15inch woofer. With it’s full length is braced to avoid any colorations and it’s build of grade A Baltic birch plywood.

The embedded -more than adequate- 100W digital amplifier will reproduce a max SPL of about 130db depending on placement.

Technical Specification:

Sensitivity: 110db
Adjustments: Volume, Phase 0-360 deg, Crossover frequency 30-120Hz, Bass boost frequency 20-50Hz and level 0 – +6db.
Inputs: Stereo line level RCA or high level speaker binding posts.
Inputs impedance: Line level 10Kohm, High level 1Kohm. <strong Near room limits or corner.
Dimensions: 113 x 55 x 118 (cm, HxDxL)

Weight net: 95Kg