Anima 3-Way Horn Loaded Loudspeakers
ANIMA utilizes: 15" woofer and 5" mid modified in house, 1" compression driver with neodymium magnet and titanium diaphragm for high frequencies.
ANIMA's distinguished design is build around it's bass horn which stands tall and fires to the floor. Mid height on the side you have a mid range horn and on top the high range horn. Both bass and mid horns are build from Baltic birch plywood while the hi horn is build from our proprietary epoxy compound. Crossovers are located on the bottom of the bass horn. This allows the crossover parts be well spaced to avoid any kind of interference and distant from any driver's magnetic field. All components are hard wired and 1st order crossovers used in all ways.
All internal wiring are made of high purity OFC copper with waxed cotton insulation. Brass bracing parts with felt acoustic isolation are used to minimize vibrations transfer on contacts of the different horns. Horns are mechanically time aligned for time coherent result. For mid and high frequencies level adjustments are available to the user making it possible to fine tune ANIMA to the listening room. Beaming of the high frequencies horn is also available to aim the listening position.
System Sensitivity: 109db
Impedance Nominal: 8ohms
Crossover @ 250HZ & 1500HZ
Recommended Power > 3watt
Recommended Amplifiers. Low-mid powered tube or solid state with low or no feedback.
Recommended Placement. Near wall or near room corner placement is desirable.
Preferred clearance between speakers. >2 m.
Listening Distance. >3 m.
Dimensions. H158cm, W87cm, D87cm
Weight. 75Kgr each