Pearl ELM-A

Description

This model meets very specific recording demands

Pearl's linear capsule has more than twice the surface area of large-diameter round capsules. This gives excellent signal-to-noise ratio and a near resonance-free frequency response. The ELM-A's speciality is its polar pattern that is a normal cardioid horizontally and much narrower vertically.

The ELM-A has two separate outputs via a 5 pin XLR connector. Both outputs deliver independent cardioids, one from each membrane of the dual membrane capsule, i.e. "Back to Back" output or 180 degrees stereo. Both sides can be used simultaneously or independently. When the ELM-A is connected to two inputs at the console/DAW, an omni, figure-of-eight or cardioid pattern can be obtained by using the pan pots and phase shifting of one channel.

The ELM-A is finished in piano black ED lacquer with a white logo, ring and engraved model number.

Package includes

  • Wooden box
  • Microphone shockmount 1930
  • Individual frequency graph

Frequency response

 

Specifications

Polar pattern Cardioid, Omni, Figure-of-eight
Sensitivity 22mV/Pa
Frequency response 20Hz - 25kHz
Impedance 100 ohms
Operating Voltage 48 volts
Rec. load imp 1k ohms
Current consumption 3.5 mA
Self noise 11 dBA
Max SPL 126 dB
Connector 5-pin XLR
Dimensions 192 x ΓΈ32 mm/28mm
Weight 305 g